Fix Your Stuff Community Store

2013中期 MacBook Air 13" 电池更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

Back to Guide
English
Chinese
Previous step

Translating step 3

Step 3
MacBook Air 13" Mid 2013 Battery Replacement: step 0, image 1 of 1

  • When handling the battery, avoid squeezing or touching the four exposed lithium polymer cells.

  • Lift the battery from its edge nearest the logic board and remove it from the upper case.

  • If you're installing a new battery, you should calibrate it after installation:

  • Charge it to 100%, and then keep charging it for at least 2 more hours. Then, unplug and use it normally to drain the battery. When you see the low battery warning, save your work, and keep your laptop on until it goes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.

  • If you notice any unusual behavior or problems after installing your new battery, you may need to reset your MacBook's SMC.

当拆解电池时，注意避免挤压触碰四个裸露的锂聚合物电芯

从靠近主板的一边抬起电池将电池从上盖取下

在你使用的电池之前先 校准 它：

把电池充满到100%，之后继续保持充电至少两小时。然后停止充电，开始像日常一样使用它来慢慢消耗电量。当你看到低电量警告时，保存你没做完的工作，同时就让笔记本开着，直到它因为电量用尽而进入梦乡。再等待至少五个小时，之后把它完全充满到100%

如果您在安装新电池后发现任何异常或问题，则可能需要重置MacBook Pro的SMC。

Your contributions are licensed under the open source Creative Commons license.