This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.
Align the back cover with its original position on the frame.
Press down on the perimeter of the adhesive to bond the adhesive to the back cover.
To ensure a good seal, apply constant pressure to the back cover with a flat, heavy object. A hefty book works well.
If a substantial gap remains, try squeezing the gap with your fingers but don't force it. Pry the back cover off and check for any surface irregularities, such as unseated connectors or loose and jutting screws.
Your contributions are licensed under the open source Creative Commons license.
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.
Open help
