Skip to main content

iPhone 14 Rückabdeckung aus Glas tauschen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
German

Translating step 18

Step 18
iPhone 14 Rear Glass Replacement, Disconnect the battery: step 0, image 1 of 2 iPhone 14 Rear Glass Replacement, Disconnect the battery: step 0, image 2 of 2
Disconnect the battery
  • Use the pointed end of a spudger to disconnect the battery cable by prying the connector straight up from its socket.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

Benutze die Spitze eines Spudgers, um das Akkukabel abzutrennen, indem du den Stecker gerade nach oben aus seinem Anschluss hebelst.

Vermeide es, die schwarze Silikondichtung um diesen und andere Platinenanschlüssen zu beschädigen. Diese Dichtungen bieten einen zusätzlichen Schutz gegen das Eindringen von Staub und Feuchtigkeit.

Biege den Stecker etwas vom Logic Board weg, um zu vermeiden, dass er sich versehentlich wieder mit dem Anschluss verbindet. Das kann dazu führen, dass sich dein iPhone während der Reparatur wieder einschaltet.

Your contributions are licensed under the open source Creative Commons license.