Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.
Translating step 2
Step 2
-
Remove the seven screws (Four 8.5 mm screws, and three 12.5 mm screws) on the bottom of the device, this will allow you to remove the cover later on.
-
Use a Phillips #1 screwdriver to remove the four 8.5 mm screws from the bottom of the device.
-
Use a Phillips #0 screwdriver to remove the three 12.5 mm screws.
Your contributions are licensed under the open source Creative Commons license.