/
My Workbench

Get quick access to guides, parts and answers for your devices

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Join
Log In

Recambio de la tapa superior de la Cricut Maker

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Back to Guide
English
Spanish
Next step

Translating step 1

Step 1
Cricut Maker Top Door/ Lid Replacement: step 0, image 1 of 3 Cricut Maker Top Door/ Lid Replacement: step 0, image 2 of 3 Cricut Maker Top Door/ Lid Replacement: step 0, image 3 of 3

  • To remove the cover from the connecting joint, use an iFixit opening tool, and pry around the perimeter of the cover to release it.

  • Applying too much pressure to this can break it as it is very fragile.

  • There is some adhesive holding the cover, so it may take some patience and finesse to pry the cover off.

  • Remove the cover from the connecting joint and set it aside.

Para retirar la tapa de la junta de conexión, utiliza una herramienta de apertura iFixit y haz palanca alrededor del perímetro de la tapa para liberarla.

Aplicar demasiada presión puede romperla, ya que es muy frágil.

Hay un poco de adhesivo que sujeta la cubierta, por lo que puede requerir algo de paciencia y delicadeza hacer palanca para retirarla.

Retira la tapa de la junta de conexión y déjala a un lado.

Your contributions are licensed under the open source Creative Commons license.