/
My Workbench

Get quick access to guides, parts and answers for your devices

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Join
Log In

Sostituzione coperchio/sportello superiore Cricut Maker

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Back to Guide
English
Italian
Next step

Translating step 1

Step 1
Cricut Maker Top Door/ Lid Replacement: step 0, image 1 of 3 Cricut Maker Top Door/ Lid Replacement: step 0, image 2 of 3 Cricut Maker Top Door/ Lid Replacement: step 0, image 3 of 3

  • To remove the cover from the connecting joint, use an iFixit opening tool, and pry around the perimeter of the cover to release it.

  • Applying too much pressure to this can break it as it is very fragile.

  • There is some adhesive holding the cover, so it may take some patience and finesse to pry the cover off.

  • Remove the cover from the connecting joint and set it aside.

Per rimuovere la copertura dalla giuntura, usa uno strumento di apertura iFixit e fai leva intorno al suo perimetro per liberarla.

Se applichi troppa pressione in questo passo, potresti rompere la copertura, che è molto fragile.

C'è dell'adesivo che tiene ferma la copertura, quindi servono molta pazienza e attenzione per rimuoverla.

Rimuovi la copertura dalla giuntura e mettila da parte.

Your contributions are licensed under the open source Creative Commons license.