Fix Your Stuff Community Store

Reemplazo de la tapa trasera del Samsung Galaxy S22

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 3

Step 3
Samsung Galaxy S22 Back Cover Replacement, Insert an opening pick: step 0, image 1 of 3 Samsung Galaxy S22 Back Cover Replacement, Insert an opening pick: step 0, image 2 of 3 Samsung Galaxy S22 Back Cover Replacement, Insert an opening pick: step 0, image 3 of 3
Insert an opening pick

  • Apply a suction handle to the back cover, as close to the bottom edge as possible.

  • Pull up on the suction handle with strong, steady force to create a gap between the cover and the frame.

  • If you have trouble creating a gap, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.

  • Insert an opening pick into the gap.

Insertar una púa de apertura

Aplica una ventosa a la tapa trasera, lo más cerca posible del borde inferior.

Tira hacia arriba de la ventosa con fuerza firme y constante para crear un espacio entre la cubierta y el marco.

Si tienes problemas para crear un espacio, aplica más calor para ablandar aún más el adhesivo. Sigue las instrucciones de iOpener para evitar el sobrecalentamiento.

Inserta una púa de apertura en el espacio.

Your contributions are licensed under the open source Creative Commons license.