Fix Your Stuff Community Store

Opening Procedure (1st and 2nd Gen)

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Dutch
Previous step Next step

Translating step 10

Step 10
Opening Procedure (1st and 2nd Gen), Separate the top edge adhesive: step 0, image 1 of 2 Opening Procedure (1st and 2nd Gen), Separate the top edge adhesive: step 0, image 2 of 2
Separate the top edge adhesive

  • Insert a new opening pick in the gap you just created.

  • Slide the pick along the top right edge, stopping when you reach the right ambient light sensor.

  • Don't insert the opening pick more than 5 mm.

  • Leave the pick to the right of the sensor to prevent the adhesive from re-sealing.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.