Fix Your Stuff Community Store

Opening Procedure (1st and 2nd Gen)

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Dutch
Previous step Next step

Translating step 19

Step 19
Opening Procedure (1st and 2nd Gen), Separate the left edge adhesive: step 0, image 1 of 2 Opening Procedure (1st and 2nd Gen), Separate the left edge adhesive: step 0, image 2 of 2
Separate the left edge adhesive

  • Insert an opening pick at a 45˚ angle just above the bottom left corner.

  • Don't insert the pick more than 5 mm or you'll damage the display cables.

  • Carefully slide the pick along the left edge, stopping when you reach the flat section of the frame.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.