My Workbench

Get quick access to guides, parts and answers for your devices

Opening Procedure (1st and 2nd Gen)

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English

Dutch

Previous step Next step

Translating step 25

Step 25

Opening Procedure (1st and 2nd Gen), Disconnect the ambient light sensor cable: step 0, image 1 of 2

Opening Procedure (1st and 2nd Gen), Disconnect the ambient light sensor cable: step 0, image 2 of 2

Disconnect the ambient light sensor cable

Use the flat end of a spudger to disconnect the ambient light sensor cable by lifting straight up on the press connector.
To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Your contributions are licensed under the open source Creative Commons license.