Fix Your Stuff Community Store

Opening Procedure (1st and 2nd Gen)

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Dutch
Previous step Next step

Translating step 3

Step 3
Opening Procedure (1st and 2nd Gen), Anti-Clamp instructions: step 0, image 1 of 3 Opening Procedure (1st and 2nd Gen), Anti-Clamp instructions: step 0, image 2 of 3 Opening Procedure (1st and 2nd Gen), Anti-Clamp instructions: step 0, image 3 of 3
Anti-Clamp instructions

  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Place an object under your iPad so it rests level between the suction cups.

  • Position the suction cups near the middle of the right edge—one on the top, and one on the bottom.

  • Hold the bottom of the Anti-Clamp steady and firmly press down on the top cup to apply suction.

  • If you find that the surface of your iPad is too slippery for the Anti-Clamp to hold onto, use tape to create a grippier surface.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.