Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.
Translating step 14
Step 14
Separate the top edge adhesive
-
Insert a new opening pick in the top right corner and slide along the top edge to separate the adhesive. Make sure to note the following:
-
Don't insert an opening pick more than 5 mm or you'll damage the display edges.
-
Don't insert an opening pick more than 3 mm or you'll damage the ambient light sensors.
-
Don't insert an opening pick more than 2 mm or you'll damage the front camera module.
-
Leave the pick in the top left corner to prevent the adhesive from re-sealing.
Your contributions are licensed under the open source Creative Commons license.