Fix Your Stuff Community Store

배터리 차단

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

Back to Guide
English
Korean
Next step

Translating step 1

Step 1
Battery Blocking, Disconnect the battery: step 0, image 1 of 2 Battery Blocking, Disconnect the battery: step 0, image 2 of 2
Disconnect the battery

  • Use a Phillips screwdriver to remove the 1.8 mm screw securing the battery connector to the logic board.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.

배터리 연결 해제하기

Phillips 드라이버를 사용하여 배터리 커넥터를 로직 보드에 고정하는 1.8mm 나사를 풀어주세요.

이 수리 과정에서 각 나사의 위치를 기억하고, 나사를 제자리에 정확히 다시 돌려놓도록 주의하세요.

Your contributions are licensed under the open source Creative Commons license.