Skip to main content

iPad Air 4の背面カメラ交換

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Japanese

Translating step 5

Step 5
iPad Air 4 Rear Camera Replacement, Remove the rear camera: step 0, image 1 of 3 iPad Air 4 Rear Camera Replacement, Remove the rear camera: step 0, image 2 of 3 iPad Air 4 Rear Camera Replacement, Remove the rear camera: step 0, image 3 of 3
Remove the rear camera
  • Lay the iPad screen side up.

  • Use the flat end of a spudger to pry up the rear camera.

  • If it's difficult to pry the camera up, apply a heated iOpener, wait two minutes, and try again.

  • Don't use isopropyl alcohol to weaken the adhesive or you'll damage the rear camera.

  • Remove the rear camera.

  • During reassembly, you can reuse the adhesive in the frame if it's still intact and clean.

  • If the adhesive is damaged or dirty, use tweezers to remove it and use a small piece of Tesa tape to secure the rear camera to the frame.

画面がついていた面を表にします。

スパッジャーの平らな面を使って、てこの原理で背面カメラを持ち上げます。

カメラを持ち上げるのが難しいと思った時は、再び、温めたiOpenerを2分置くなどしてから再度チャレンジしてみてください。

IPA(アルコール)で接着を弱めることは避けてください!背面カメラが壊れてしまいます。

背面カメラを外してください。

傷や汚れがなければ、再組立時にフレームの接着を再利用しても構いません。

接着テープに傷があったり汚れたりしていた場合は、ピンセットを使って、残った接着を取り除いた後に、両面テープを同じ大きさに切って貼り直すことで、十分な強度を保ったまま接着を行うことができます(tesa tapeの様な製品を使用することが推奨されます)。

Your contributions are licensed under the open source Creative Commons license.