Fix Your Stuff Community Store

iPad Air 4 Logic Board tauschen

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
German
Previous step Next step

Translating step 23

Step 23
iPad Air 4 Logic Board Replacement: step 0, image 1 of 3 iPad Air 4 Logic Board Replacement: step 0, image 2 of 3 iPad Air 4 Logic Board Replacement: step 0, image 3 of 3

  • The antenna cables at the bottom are secured to the frame with stiff glue. Pull slowly to avoid tearing them.

  • Gently pull on the antenna cable harness to separate them from the frame.

  • During reassembly, use small strips of Tesa tape to secure the antenna cables to the frame.

Die Antennenkabel am unteren Rand sind mit hartem Kleber am Rahmen befestigt. Ziehe sie langsam heraus, sie dürfen nicht reißen.

Ziehe das Kabelbündel zur Antenne behutsam heraus, bis es sich vom Rahmen löst.

Klebe die Antennenkabel beim Zusammenbau mit schmalen Streifen von Tesaband wieder am Rahmen fest.

Your contributions are licensed under the open source Creative Commons license.