Skip to main content

iPad Pro 11" LiDAR Sensor Assembly Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Korean

Translating step 1

Step 1
iPad Pro 11" LiDAR Sensor Assembly Replacement, LiDAR sensor assembly information: step 0, image 1 of 2 iPad Pro 11" LiDAR Sensor Assembly Replacement, LiDAR sensor assembly information: step 0, image 2 of 2
LiDAR sensor assembly information
  • The LiDAR sensor assembly is paired to the Face ID hardware. You'll need to transfer it to your replacement screen to keep Face ID functionality. The following steps show how to remove the sensor assembly and install it on your replacement screen.

  • The LiDAR sensor assembly is composed of four total sensors:

  • Two ambient light sensors

  • One proximity sensor

  • One microphone

  • You'll need to separate each sensor from the screen before removing the entire assembly.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.