Fix Your Stuff Community Store

iPad Pro 11" LiDAR Sensoreinheit tauschen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 3

Step 3
iPad Pro 11" LiDAR Sensor Assembly Replacement, Separate the ambient light sensors: step 0, image 1 of 2 iPad Pro 11" LiDAR Sensor Assembly Replacement, Separate the ambient light sensors: step 0, image 2 of 2
Separate the ambient light sensors

  • Insert one arm of your angled tweezers between the ambient light sensor and the screen.

  • You can also use a precision knife, but be careful not to damage the ribbon cable.

  • Pry up to separate the sensor from the screen.

  • This might take significant force.

  • Repeat this procedure for the other ambient light sensor.

Helligkeitssensoren ablösen

Setze eine Spitze einer abgewinkelten Pinzette zwischen den Helligkeitssensor und das Display ein.

Heble nach oben, bis sich der Sensor vom Display ablöst.

Eventuell brauchst du dafür ziemlich viel Kraft.

Wiederhole den Vorgang für den anderen Helligkeitssensor.

[title] Separate the ambient light sensors
-[* black] Insert one arm of your angled tweezers between the ambient light sensor and the screen.
+[* black] Insert one arm of your [product|IF145-020-5|angled tweezers] between the ambient light sensor and the screen.
+ [* icon_note] You can also use a [product|IF145-185|precision knife|new_window=true], but be careful not to damage the ribbon cable.
[* black] Pry up to separate the sensor from the screen.
[* icon_note] This might take significant force.
[* black] Repeat this procedure for the other ambient light sensor.

Your contributions are licensed under the open source Creative Commons license.