Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.
Translating step 3
Step 3
Separate the ambient light sensors
-
Insert one arm of your angled tweezers between the ambient light sensor and the screen.
-
Pry up to separate the sensor from the screen.
-
Repeat this procedure for the other ambient light sensor.
| [title] Separate the ambient light sensors | |
| - | [* black] Insert one arm of your angled tweezers between the ambient light sensor and the screen. |
| + | [* black] Insert one arm of your [product|IF145-020-5|angled tweezers] between the ambient light sensor and the screen. |
| + | [* icon_note] You can also use a [product|IF145-185|precision knife|new_window=true], but be careful not to damage the ribbon cable. |
| [* black] Pry up to separate the sensor from the screen. | |
| [* icon_note] This might take significant force. | |
| [* black] Repeat this procedure for the other ambient light sensor. |
Your contributions are licensed under the open source Creative Commons license.