Fix Your Stuff Community Store

iPad Pro 11インチ LiDARセンサーアセンブリの交換

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
Japanese
Previous step Next step

Translating step 3

Step 3
iPad Pro 11" LiDAR Sensor Assembly Replacement, Separate the ambient light sensors: step 0, image 1 of 2 iPad Pro 11" LiDAR Sensor Assembly Replacement, Separate the ambient light sensors: step 0, image 2 of 2
Separate the ambient light sensors

  • Insert one arm of your angled tweezers between the ambient light sensor and the screen.

  • You can also use a precision knife, but be careful not to damage the ribbon cable.

  • Pry up to separate the sensor from the screen.

  • This might take significant force.

  • Repeat this procedure for the other ambient light sensor.

環境光センサーを外す

ピンセットの片方の腕を、環境光センサーとスクリーンの間に挿入します。

こじ上げてセンサーとスクリーンを分離します。

これには相当な力が必要かもしれません。

もう一方の環境光センサーについても、この手順を繰り返します。

[title] Separate the ambient light sensors
-[* black] Insert one arm of your angled tweezers between the ambient light sensor and the screen.
+[* black] Insert one arm of your [product|IF145-020-5|angled tweezers] between the ambient light sensor and the screen.
+ [* icon_note] You can also use a [product|IF145-185|precision knife|new_window=true], but be careful not to damage the ribbon cable.
[* black] Pry up to separate the sensor from the screen.
[* icon_note] This might take significant force.
[* black] Repeat this procedure for the other ambient light sensor.

Your contributions are licensed under the open source Creative Commons license.