Fix Your Stuff Community Store

Reemplazo de conjunto de sensor LiDAR iPAD Pro 11"

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
Spanish
Previous step

Translating step 9

Step 9
iPad Pro 11" LiDAR Sensor Assembly Replacement: step 0, image 1 of 1

  • During reassembly, you'll have to perform the following:

  • Align the LiDAR sensor assembly on your replacement screen.

  • Use Tesa tape, or similar double-sided tape, to secure the cables to the screen.

  • Use E6000 adhesive, or similar adhesive, to secure the sensors to their cutouts on the screen.

  • Only apply adhesive to the edges of the sensors. Placing adhesive on the front will break them.

Durante el reensamble, tendrás que realizar lo siguiente:

Alinea el conjunto del sensor LiDARA en tu pantalla de reemplazo.

Usa cinta Tesa, o cinta de doble cara similar, para asegurar los cables a la pantalla.

Usa adhesivo F6000, o adhesivo similar, para asegurar los sensores a sus muescas en la pantalla.

Solo aplica adhesivo a los bordes de los sensores. Colocar adhesivo en el frente lo romperá.

Your contributions are licensed under the open source Creative Commons license.