/
My Workbench

Get quick access to guides, parts and answers for your devices

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Join
Log In

Logitech MX Master 2S Side Feet Removal

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Back to Guide
English
Chinese
Next step

Translating step 1

Step 1
Logitech MX Master 2S Side Feet Removal, Soften the mouse feet adhesive: step 0, image 1 of 2 Logitech MX Master 2S Side Feet Removal, Soften the mouse feet adhesive: step 0, image 2 of 2
Soften the mouse feet adhesive

  • Flip the mouse's power switch into the OFF position, unplug any cables, and flip it over so the feet are facing up.

  • The unique shape of some mice can prevent them from laying flat. If you need to, lay your mouse on a soft towel to prevent wobble.

  • If you're planning to reuse your existing mouse feet, note that the adhesive needs to be thoroughly heated for them to be cleanly removed.

  • Apply a heated iOpener to the left and right mouse feet for about one minute each.

  • Alternatively, you can use a hair dryer to soften the mouse feet adhesive.

  • When using a hair dryer, don't heat the feet for more than a couple seconds at a time—anything hotter than just warm to the touch risks melting or warping the plastic lower case.

  • The information sticker adhesive may soften during this step, but you don't need to remove it.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.