Fix Your Stuff Community Store

Reemplazo de la tapa trasera del Razer Blade 15 Advanced Model (Principios del 2020)

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 2

Step 2
Razer Blade 15 Advanced Model (Early 2020) Back Cover Replacement, Insert an opening pick: step 0, image 1 of 3 Razer Blade 15 Advanced Model (Early 2020) Back Cover Replacement, Insert an opening pick: step 0, image 2 of 3 Razer Blade 15 Advanced Model (Early 2020) Back Cover Replacement, Insert an opening pick: step 0, image 3 of 3
Insert an opening pick

  • Depending on the age and condition of your laptop, the back cover may come off sooner than this guide instructs. If it feels loose, remove it at any time.

  • Apply a suction handle to the middle of the back cover's right edge, between the lower rubber foot and the middle screws.

  • Pull up on the suction handle to create a small gap between the back cover and the frame.

  • Insert an opening pick into the gap.

Inserta una púa de apertura

Dependiendo de la edad y el estado de tu portátil, la tapa trasera puede desprenderse antes de lo que se indica en esta guía. Si te parece que está suelta, quítala en cualquier momento.

Aplica una ventosa en el centro del borde derecho de la tapa trasera, entre la pata de goma inferior y los tornillos centrales.

Tira hacia arriba de la ventosa para crear un pequeño hueco entre la tapa trasera y el marco.

Introduce una púa de apertura en el hueco.

Your contributions are licensed under the open source Creative Commons license.