Fix Your Stuff Community Store

Steam Deck OLED 右側ボタンボードの交換

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

Back to Guide
English
Japanese
Previous step Next step

Translating step 5

Step 5
Steam Deck OLED Right Button Board Replacement, Disconnect the right haptics: step 0, image 1 of 3 Steam Deck OLED Right Button Board Replacement, Disconnect the right haptics: step 0, image 2 of 3 Steam Deck OLED Right Button Board Replacement, Disconnect the right haptics: step 0, image 3 of 3
Disconnect the right haptics

  • If you aren't replacing your button board, you can leave this cable connected and lay the board over the left side of the frame after you've removed the screws.

  • Be careful when disconnecting the haptics, as the cables and connector are very delicate. Pry only on the base of the white connector, and not on the cables or socket.

  • Insert the point of your spudger under the neck of the haptics cable connector.

  • Gently pry up to disconnect it.

右側ハプティクスの接続を外す

ボタンボードを交換しない場合は、このケーブルを接続したままにして、ネジを外した後にボードをフレームの左側に重ねます。

ケーブルとコネクターは非常にデリケートなので、ハプティクスを外すときは注意してください。ケーブルやソケットではなく、白いコネクターの根元だけをこじ開けます。

ハプティクスケーブルコネクタの首の下に、スパッジャーの先を差し込みます。

ゆっくりとこじ上げて外します。

Your contributions are licensed under the open source Creative Commons license.