Fix Your Stuff Community Store

Rimozione scheda principale

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
Italian
Next step

Translating step 1

Step 1
Main Board Removal, Remove the main board screws: step 0, image 1 of 2 Main Board Removal, Remove the main board screws: step 0, image 2 of 2
Remove the main board screws

  • Use a Phillips screwdriver to remove the 11 mm‑long SSD screw.

  • Be careful not to lose the small spacer under the screw.

  • Use a Phillips screwdriver to remove the two 11.8 mm‑long APU tension bracket screws.

  • Don't remove or install one screw at a time, or you may damage the APU. During disassembly and reassembly, alternate between the two screws a 1/2 turn at a time to maintain even pressure on the bracket.

  • Use a TR8 Torx security screwdriver to remove the two remaining 7.3 mm‑long main board screws.

Rimuovi le viti della scheda principale

Usa un cacciavite a croce Philips per rimuovere la vite dell'SSD lunga 11 mm.

Fai attenzione a non perdere il piccolo distanziale sotto la vite.

Usa un cacciavite a croce Philips per rimuovere le viti della staffa APU lunghe 11,8 mm.

Utilizza un cacciavite di sicurezza Torx TR8 per rimuovere le rimanenti due viti della scheda principale lunghe 7,3 mm.

[title] Remove the main board screws
[* red] Use a Phillips screwdriver to remove the 11 mm‑long SSD screw.
[* icon_note] Be careful not to lose the small spacer under the screw.
-[* yellow] Use a Phillips screwdriver to remove the two 11.8 mm‑long APU bracket screws.
+[* yellow] Use a Phillips screwdriver to remove the two 11.8 mm‑long APU tension bracket screws.
+ [* icon_note] ***Don't remove or install one screw at a time***, or you may damage the APU. During disassembly and reassembly, alternate between the two screws a 1/2 turn at a time to maintain even pressure on the bracket.
[* light_blue] Use a TR8 Torx security screwdriver to remove the two remaining 7.3 mm‑long main board screws.

Your contributions are licensed under the open source Creative Commons license.