Skip to main content

Reemplazo de la carcasa trasera de la PlayStation Portal

Notice: You are editing a prerequisite guide. Any changes you make will affect all 18 guides that include this step.

English
Spanish

Translating step 4

Step 4
PlayStation Portal Back Shell Replacement, Unclip the back shell: step 0, image 1 of 2 PlayStation Portal Back Shell Replacement, Unclip the back shell: step 0, image 2 of 2
Unclip the back shell
  • Push the flat edge of a spudger into the back shell's left, inner seam.

  • This releases the clip in that area while flexing the shell slightly, creating a larger outer seam.

  • Keep the spudger inserted in the seam.

Empuja el borde plano de un spudger en la costura interior izquierda de la carcasa trasera.

Esto libera el clip en esa área mientras flexiona ligeramente la carcasa, creando una costura exterior más grande.

Mantén el spudger insertado en la costura.

Your contributions are licensed under the open source Creative Commons license.