Fix Your Stuff Community Store

Sostituzione strisce adesive (pannello originale) iPad 4 CDMA

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
Italian
Next step

Translating step 1

Step 1
iPad 4 CDMA Adhesive Strips Replacement (Existing Panel): step 0, image 1 of 3 iPad 4 CDMA Adhesive Strips Replacement (Existing Panel): step 0, image 2 of 3 iPad 4 CDMA Adhesive Strips Replacement (Existing Panel): step 0, image 3 of 3

  • In the following steps, you will be placing the remaining pieces of adhesive on the front panel.

  • Do not peel the clear backing off the strips just yet.

  • Place the bridge shaped adhesive strip between the top edge of the inner frame of the front panel and the camera mounting bracket.

  • Smooth the strip down from the center out, taking care to not trap any air bubbles between the strip and the front panel.

Nei prossimi passaggi, applicherai i pezzi rimanenti dell'adesivo sul vetro anteriore.

Non rimuovere ancora la protezione trasparente dalle strisce.

Appoggia la striscia adesiva a forma di ponte tra il bordo superiore della cornice interna del pannello anteriore e la staffa di montaggio della fotocamera.

Appiattisci la striscia dal centro verso l'esterno, stando attento a non far formare delle bolle tra la striscia stessa e il pannello.

Your contributions are licensed under the open source Creative Commons license.