Fix Your Stuff Community Store

Sostituzione strisce adesive (pannello originale) iPad 4 CDMA

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
Italian
Previous step Next step

Translating step 8

Step 8
iPad 4 CDMA Adhesive Strips Replacement (Existing Panel): step 0, image 1 of 2 iPad 4 CDMA Adhesive Strips Replacement (Existing Panel): step 0, image 2 of 2

  • Use a pair of tweezers to peel the clear backing up off the adhesive strip directly underneath the home button ribbon cable.

  • Lay the home button ribbon cable down on the adhesive strip and smooth the cable down from the center out, taking care to not trap any air bubbles between the strip and the front panel.

  • Do not peel the clear backing off the strips just yet.

Usa un paio di pinzette per rimuovere la protezione trasparente dalla striscia adesiva sotto il cavo a nastro del tasto Home.

Appoggia il cavo a nastro del tasto Home sulla striscia adesiva ed appiattiscilo dal centro verso l'esterno, stando attento a non far formare bolle tra la striscia e il cavo.

Non rimuovere ancora la protezione trasparente dalle altre strisce.

-[* black] Use a pair of tweezers to peel the clear backing up off the adhesive strip directly underneath the home button ribbon cable.
+[* black] Use a pair of [product|IF145-020|tweezers] to peel the clear backing up off the adhesive strip directly underneath the home button ribbon cable.
[* black] Lay the home button ribbon cable down on the adhesive strip and smooth the cable down from the center out, taking care to not trap any air bubbles between the strip and the front panel.
[* icon_caution] ***Do not peel the clear backing off the strips just yet.***

Your contributions are licensed under the open source Creative Commons license.