Xbox Series X Rückseite ersetzen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 24 guides that include this step.

English

German

Next step

Translating step 1

Step 1

Uncover the back panel screws

Before you begin, completely power down and unplug all cables from your console.
Two stickers cover the back panel screws. You can remove the stickers without heating them, though it makes them much easier to remove cleanly.
Heat an iOpener and lay it on the smaller sticker near the bottom of the back panel for two minutes.
Alternatively, you can use a hair dryer to heat the sticker.

+	[title] Uncover the back panel screws
+	[* icon_caution] *Before you begin, completely power down and unplug all cables from your console.*
+	[* icon_note] [link\|https://guide-images.cdn.ifixit.com/igi/ILtlPEkWqVaaBPqt.full\|Two stickers\|new_window=true] cover the back panel screws. You can remove the stickers without heating them, though it makes them much easier to remove cleanly.
+	[* black] [guide\|25705\|Heat an iOpener\|new_window=true] and lay it on the smaller sticker near the bottom of the back panel for two minutes.
+	[* icon_note] Alternatively, you can use a [guide\|157348\|hair dryer\|new_window=true] to heat the sticker.

Your contributions are licensed under the open source Creative Commons license.

+	[title] Uncover the back panel screws
+	[* icon_caution] *Before you begin, completely power down and unplug all cables from your console.*
+	[* icon_note] [link\|https://guide-images.cdn.ifixit.com/igi/ILtlPEkWqVaaBPqt.full\|Two stickers\|new_window=true] cover the back panel screws. You can remove the stickers without heating them, though it makes them much easier to remove cleanly.
+	[* black] [guide\|25705\|Heat an iOpener\|new_window=true] and lay it on the smaller sticker near the bottom of the back panel for two minutes.
+	[* icon_note] Alternatively, you can use a [guide\|157348\|hair dryer\|new_window=true] to heat the sticker.