Fix Your Stuff Community Store

iPhone 5s 前面板组件更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 32 guides that include this step.

Back to Guide
English
Chinese
Previous step Next step

Translating step 5

Step 5
iPhone 5s Front Panel Assembly Replacement: step 0, image 1 of 3 iPhone 5s Front Panel Assembly Replacement: step 0, image 2 of 3 iPhone 5s Front Panel Assembly Replacement: step 0, image 3 of 3

  • Pull the blue handle forwards to lock the arms.

  • Turn the handle clockwise 360 degrees or until the cups start to stretch.

  • Make sure the suction cups remain aligned with each other. If they begin to slip out of alignment, loosen the suction cups slightly and realign the arms.

  • Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time and wait a few seconds between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next two steps.

将蓝色手柄向前拉，锁定双臂。

顺时针旋转手柄 360 度，直到吸盘开始拉伸。

确保吸盘相互对齐。如果吸盘开始滑脱，请稍稍松开吸盘并重新对齐支臂。

当反向钳产生足够大的间隙时，将撬片插入屏幕下方。

如果反向钳没有形成足够的间隙，将手柄旋转四分之一圈。

每次摇动不要超过四分之一圈，每圈之间等待几秒钟。把工作交给反向钳和时间来完成。

跳过接下来的两个步骤。

Your contributions are licensed under the open source Creative Commons license.