Fix Your Stuff Community Store

Reemplazo del ensamblaje del panel frontal del iPhone 5s

Notice: You are editing a prerequisite guide. Any changes you make will affect all 32 guides that include this step.

Back to Guide
English
Spanish
Next step

Translating step 1

Step 1
iPhone 5s Front Panel Assembly Replacement, Removing the Pentalobe screws: step 0, image 1 of 1
Removing the Pentalobe screws

  • Before you proceed, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 3.9 mm Pentalobe screws from either side of Lightning connector.

Extracción de los tornillos Pentalobe

Antes de continuar, descarga la batería del iPhone por debajo del 25%. Una batería de litio-ion cargada puede incendiar y / o explotar si se presiona accidentalmente.

Apaga siempre tu iPhone antes de comenzar el desmontaje.

Retira los dos tornillos Pentalobe de 3.9 mm de cada lado del conector Lightning.

Your contributions are licensed under the open source Creative Commons license.