/
My Workbench

Get quick access to guides, parts and answers for your devices

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Join
Log In

iBook G4 14" 933 MHz-1.33 GHz Heat Sink Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Back to Guide
English
Korean
Previous step Next step

Translating step 3

Step 3
iBook G4 14" 933 MHz-1.33 GHz Heat Sink Replacement: step 0, image 1 of 1

  • Due to variations between iBook G4 models, your heatsink may have either 5 or 6 screws. We've noted all possible positions for screws in the step below. If there's no screw to remove, then skip to the next screw. Be sure that you remove all necessary screws before attempting to remove the heat sink.

  • Remove the following 6 screws and 3 nuts from the heat sink:

  • One 2 mm Phillips extending from a finger on the left edge of the heatsink and adjacent the firewire port (not present on some models)

  • Three 3 mm Phillips from around the fan (some models may only have 2 screws).

  • One 3.5 mm Phillips on the left side of the heat sink (not present on some models).

  • One 4.5 mm Phillips at the top right corner of the heat sink.

  • One 6 mm Phillips at the lower left corner of the heat sink.

  • One 4 mm nut from the right side of the heat sink.

  • Two 4 mm screw nuts with attached springs from either side of the heat sink.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.