Fix Your Stuff Community Store

iMac Intel Reemplazo de pantalla de 27 "EMC 2546

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 44 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 10

Step 10
iMac Intel 27" EMC 2546 Display Replacement: step 0, image 1 of 3 iMac Intel 27" EMC 2546 Display Replacement: step 0, image 2 of 3 iMac Intel 27" EMC 2546 Display Replacement: step 0, image 3 of 3

  • While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.

  • Set the iMac face-up on a table.

  • Starting from the top right corner of the iMac, insert a plastic card between the display and frame.

  • Be careful not to insert it more than 3/8" (9.5 mm), or you may damage internal components.

Si bien la herramienta de apertura hizo la mayor parte del trabajo, la pantalla aún se adherirá ligeramente a la carcasa. Se necesitará una tarjeta de plástico para liberar el último adhesivo.

Coloca el iMac boca arriba en una mesa.

Comenzando desde la esquina superior derecha del iMac, inserta una tarjeta de plástico entre la pantalla y el marco.

Ten cuidado de no insertarlo más de 9.5 mm o podrías dañar los componentes internos.

Your contributions are licensed under the open source Creative Commons license.