Fix Your Stuff Community Store

iPhone 5s Logic Board Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Dutch
Previous step Next step

Translating step 6

Step 6
iPhone 5s Logic Board Replacement: step 0, image 1 of 1

  • Remove the following screws from the logic board:

  • One 2.4 mm Phillips #000 screw

  • This screw also holds a small metal contact beneath the logic board. It's held in place underneath a plastic bracket, but if you see it slipping out, refer to this step to remove it.

  • Two 2.3 mm Phillips #000 screws

  • Four 2.8 mm standoff screws

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.