Fix Your Stuff Community Store

Reemplazo de la placa lógica de Wi-Fi del iPad

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 2

Step 2
iPad Wi-Fi Logic Board Replacement: step 0, image 1 of 1

  • Remove the following screws securing the logic board to the rear panel assembly.

  • Two 4.56 mm T5 Torx screws.

  • Two 3.76 mm T5 Torx screws.

Quita los siguientes tornillos que sujetan la placa lógica al conjunto del panel posterior.

Dos tornillos Torx T5 de 4,56 mm.

Dos tornillos Torx T5 de 3,76 mm.

Your contributions are licensed under the open source Creative Commons license.