Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.
Translating step 8
Step 8
-
Remove the following six screws securing the logic board to to the upper case:
-
One 3.1 mm T5 Torx screw
-
One 2.5 mm T5 Torx screw
-
One 5.5 mm silver, raised-head T5 Torx screw
-
Two 5.7 mm T5 Torx screws
-
One 3.8 mm silver T5 Torx screw
Your contributions are licensed under the open source Creative Commons license.