Skip to main content

Remplacement du panneau frontal de l'iPad Air WiFi

Notice: You are editing a prerequisite guide. Any changes you make will affect all 76 guides that include this step.

English
French

Translating step 23

Step 23
iPad Air Wi-Fi Front Panel Replacement: step 0, image 1 of 3 iPad Air Wi-Fi Front Panel Replacement: step 0, image 2 of 3 iPad Air Wi-Fi Front Panel Replacement: step 0, image 3 of 3
  • Slide the lower left pick to the lower left corner to cut the adhesive on that corner.

  • Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.

  • The third image shows the two antennas and the home button cavity in the lower case of the iPad.

  • The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

Déplacez le médiator situé en bas, à gauche, vers le coin de l'iPad, pour détacher l'adhésif.

Laissez le médiator en place, sur le coin. N'allez pas plus loin et ne le retirez pas.

Vous pouvez voir, sur la troisième photo, la cavité du bouton home et les deux antennes, situées dans la partie inférieure de l'iPad.

Les prochaines étapes donneront les directives précises afin d'éviter d'endommager les composants. Ne chauffez et faites levier qu'aux endroits expressément indiqués.

Your contributions are licensed under the open source Creative Commons license.