Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.
Translating step 2
Step 2
-
Rotate the camera so the side with the SD card slot is facing you.
-
Remove the 4mm Phillips #00 screw from the bottom edge of this side.
| - | [* black] Rotate the camera so the side |
|---|---|
| - | [* |
| + | [* black] Rotate the camera so the side with the SD card slot is facing you. |
| + | [* red] Remove the 4mm Phillips #00 screw from the bottom edge of this side. |
Your contributions are licensed under the open source Creative Commons license.