Fix Your Stuff Community Store

Remplacement du panneau avant et supérieur du boîtier Canon EOS 6D

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
French
Previous step Next step

Translating step 6

Step 6
Canon EOS 6D Front and Top Body Panel Replacement: step 0, image 1 of 1

  • Rotate the camera so the side with the SD card slot is facing you.

  • Remove the following screws:

  • One 4mm fine-thread Phillips #00

  • Two 4mm coarse-thread Phillips #00

Faites pivoter l'appareil photo de sorte que le côté opposé aux ports HDMI / AV soit face à vous.

Retirez les vis suivantes:

Un Phillips à filetage fin 4 mm # 00

Deux vis à pas gros Phillips de 4 mm # 00

-[* black] Rotate the camera so the side opposite the HDMI/AV ports is facing you.
+[* black] Rotate the camera so the side with the SD card slot is facing you.
[* black] Remove the following screws:
[* red] One 4mm fine-thread Phillips #00
[* orange] Two 4mm coarse-thread Phillips #00

Your contributions are licensed under the open source Creative Commons license.