Fix Your Stuff Community Store

Reemplazo de la pantalla iMac Intel 21.5 "EMC 2805

Notice: You are editing a prerequisite guide. Any changes you make will affect all 80 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 10

Step 10
iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 1 of 3 iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 2 of 3 iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 3 of 3

  • While the opening tool cut most of the adhesive, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.

  • Set the iMac face-up on a table.

  • Starting from the top right corner of the iMac, wedge a plastic card between the display and frame.

  • Be careful not to insert the plastic card more than 3/8", or you may damage internal components.

Mientras que la herramienta de apertura corta la mayor parte del adhesivo, la pantalla aún estará ligeramente adherida a la caja. Se necesitará una tarjeta de plástico para liberar el último adhesivo.

Coloque el iMac boca arriba en una mesa.

Comenzando desde la esquina superior derecha del iMac, coloque una tarjeta de plástico entre la pantalla y el marco.

Tenga cuidado de NO insertar la tarjeta de plástico más de 3/8 ", o puede dañar los componentes internos.

Your contributions are licensed under the open source Creative Commons license.