Fix Your Stuff Community Store

iMac Intel 21.5''EMC 2805显示屏组件更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 80 guides that include this step.

Back to Guide
English
Chinese
Previous step Next step

Translating step 10

Step 10
iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 1 of 3 iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 2 of 3 iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 3 of 3

  • While the opening tool cut most of the adhesive, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.

  • Set the iMac face-up on a table.

  • Starting from the top right corner of the iMac, wedge a plastic card between the display and frame.

  • Be careful not to insert the plastic card more than 3/8", or you may damage internal components.

虽然开屏工具切除了大部分的胶，但显示屏的些许的胶还是会黏在外壳。塑料卡是最后分离粘合剂的必要工具。

让 iMac 躺在桌面上，屏幕朝天。

从 iMac 的右上角开始，往屏幕和后壳之间插一张塑料卡。

请注意不要将塑料卡插入超过0.95厘米，否则可能会损坏内部组件。

Your contributions are licensed under the open source Creative Commons license.