Fix Your Stuff Community Store

Reemplazo de la pantalla iMac Intel 21.5 "EMC 2805

Notice: You are editing a prerequisite guide. Any changes you make will affect all 80 guides that include this step.

Back to Guide
English
Spanish
Previous step

Translating step 18

Step 18
iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 1 of 3 iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 2 of 3 iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 3 of 3

  • With both plastic cards inserted as shown near the corners, gently twist the cards sideways to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the remaining adhesive.

  • Begin to lift the top of the display up from the frame.

  • Only lift the display a few inches—the display data and power cables are still connected to the logic board.

Con ambas tarjetas de plástico insertadas como se muestra cerca de las esquinas, gire suavemente las tarjetas hacia los lados para aumentar el espacio entre la pantalla y la carcasa.

Si hay secciones que parecen adherirse y no se separan, deje de girar y use una de las tarjetas para cortar el adhesivo restante.

Comience a levantar la parte superior de la pantalla desde el marco.

Solo levante la pantalla unas pulgadas: los datos de la pantalla y los cables de alimentación todavía están conectados a la placa lógica.

Your contributions are licensed under the open source Creative Commons license.