Fix Your Stuff Community Store

iMac Intel 21.5''EMC 2805显示屏组件更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 80 guides that include this step.

Back to Guide
English
Chinese
Previous step

Translating step 18

Step 18
iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 1 of 3 iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 2 of 3 iMac Intel 21.5" EMC 2805 Display Assembly Replacement: step 0, image 3 of 3

  • With both plastic cards inserted as shown near the corners, gently twist the cards sideways to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the remaining adhesive.

  • Begin to lift the top of the display up from the frame.

  • Only lift the display a few inches—the display data and power cables are still connected to the logic board.

如图所示，将两张塑料卡片插入角落附近，轻轻地往侧边扭动来增加显示屏跟主机壳的间隙。

如果有部分的黏胶而无法完全分离的时候，停止扭转，使用其中一张卡片来切开剩余的黏胶。

开始将显示屏上部从框架拉起。

只需抬起显示屏几英寸——因为显示屏的数据线和电源线仍然和主板相连。

Your contributions are licensed under the open source Creative Commons license.