Fix Your Stuff Community Store

MacBook Pro 15 "Unibody Mid 2010 Hard Drive Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Back to Guide
English
Spanish

Translating step 1

Step 1
MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement: step 0, image 1 of 2 MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement: step 0, image 2 of 2

  • Remove two T6 Torx screws from each side of the hard drive (four screws total).

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

  • If desired, peel the pull tab off your old hard drive and transfer it to the side of your new drive.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running. Many recent Macs may be able to use OS X Internet Recovery.

Retire dos tornillos T6 Torx de cada lado del disco duro (cuatro tornillos en total).

Tendrá que transferir estos tornillos a su nuevo disco duro si está cambiando las unidades.

Si lo desea, despegue la lengüeta de extracción de su disco duro anterior y transfiérala al lateral de su nueva unidad.

Si está instalando un nuevo disco duro, tenemos una guía de instalación de OS X para que pueda comenzar a usarlo. Muchos Mac recientes pueden usar OS X Internet Recovery.

Your contributions are licensed under the open source Creative Commons license.