Fix Your Stuff Community Store

MacBook Pro 15" 一体化机 2010中期硬盘更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Back to Guide
English
Chinese

Translating step 1

Step 1
MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement: step 0, image 1 of 2 MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement: step 0, image 2 of 2

  • Remove two T6 Torx screws from each side of the hard drive (four screws total).

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

  • If desired, peel the pull tab off your old hard drive and transfer it to the side of your new drive.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running. Many recent Macs may be able to use OS X Internet Recovery.

从硬盘驱动器两侧卸下两个T6 Torx螺丝（总共四颗螺丝）

如果你要更换硬盘，则需要将这些螺丝转移到新的硬盘驱动器上。

如果需要的话，撕下旧的硬盘驱动器的拉条，并将其转移到新驱动器的一侧。

如果你正在安装新的硬盘驱动器，我们有一个OS X安装指南来启动和运行。许多最近出产的Mac 能够使用OS X 因特网恢复。

Your contributions are licensed under the open source Creative Commons license.