Fix Your Stuff Community Store

MacBook Core Duo Clutch Cover Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 19 guides that include this step.

Back to Guide
English
Korean
Previous step Next step

Translating step 2

Step 2
MacBook Core Duo Clutch Cover Replacement: step 0, image 1 of 1

  • While holding the display down with one hand, use your other hand to lift the left end of the clutch cover off the clutch hinge and guide the inverter cable and AirPort cables through the gap in the clutch cover. If the cables snag on the two hooked tabs on the inside end of the clutch cover, free them carefully.

  • It may help to wiggle the clutch cover as you pull it up from the display.

  • During reassembly, make sure not to pinch the black inverter cable or the Airport wires when snapping the left end of the clutch cover back into place. To avoid pinching, it may help to lift up and hold these cables and wires in place at the top of the hinge, rather than leaving them running along the sides of the hinge.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.