Fix Your Stuff Community Store

Reemplazo de la placa lógica del iPhone 4

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 2

Step 2
iPhone 4 Logic Board Replacement: step 0, image 1 of 2 iPhone 4 Logic Board Replacement: step 0, image 2 of 2

  • Remove the following two screws:

  • One 1.2 mm Phillips

  • One 1.6 mm Phillips

  • Remove the thin steel dock connector cable cover from the iPhone.

  • Before reassembly, be sure to clean all metal-to-metal contact points on the dock connector cable cover with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.

Retira los siguientes dos tornillos:

Un Phillips de 1.2 mm

Un Phillips de 1.6 mm

Retire la cubierta delgada del cable del conector de base de acero del iPhone.

Antes del reensamble, asegúrate de limpiar todos los puntos de contacto metal a metal de la cubierta del cable conector con un desengrasante como Windex. El aceite en tus dedos tiene el potencial de causar problemas de interferencia inalámbrico.

Your contributions are licensed under the open source Creative Commons license.