Fix Your Stuff Community Store

iPhone 4 主板更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

Back to Guide
English
Chinese
Previous step Next step

Translating step 2

Step 2
iPhone 4 Logic Board Replacement: step 0, image 1 of 2 iPhone 4 Logic Board Replacement: step 0, image 2 of 2

  • Remove the following two screws:

  • One 1.2 mm Phillips

  • One 1.6 mm Phillips

  • Remove the thin steel dock connector cable cover from the iPhone.

  • Before reassembly, be sure to clean all metal-to-metal contact points on the dock connector cable cover with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.

取下以下2颗螺丝：

1颗1.2mm的菲利普螺丝

1颗1.6mm的菲利普螺丝

取出机身上固定尾插排线的薄的金属盖板。

在重组机器前，需要对尾插排线的金属接触点进行脱脂处理比如用洗洁精，手指上的油脂是潜在的危险会导致无线射频问题。

Your contributions are licensed under the open source Creative Commons license.