Fix Your Stuff Community Store

Sustitución de la carcasa trasera del controlador inalámbrico de la Xbox 360

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

Back to Guide
English
Spanish
Previous step

Translating step 5

Step 5
Xbox 360 Wireless Controller Rear Case Replacement: step 0, image 1 of 2 Xbox 360 Wireless Controller Rear Case Replacement: step 0, image 2 of 2

  • Grasp the controller by the battery compartment and the headphone jack.

  • Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board.

  • The battery contact springs are held in place by slots in the battery housing in the rear case. Be sure to realign them properly during reassembly.

Sujeta el controlador por el compartimento de la batería y el conector para auriculares.

Levanta el compartimento de la batería para separarlo del conector de los auriculares, separando la carcasa trasera de la carcasa frontal y la placa lógica.

Los resortes de contacto de la batería se mantienen en su lugar mediante ranuras en el alojamiento de la batería en la carcasa trasera. Asegúrate de realinearlos correctamente durante el montaje.

Your contributions are licensed under the open source Creative Commons license.