Fix Your Stuff Community Store

Remplacement du boîtier arrière de la manette sans fil de la Xbox 360

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

Back to Guide
English
French
Previous step

Translating step 5

Step 5
Xbox 360 Wireless Controller Rear Case Replacement: step 0, image 1 of 2 Xbox 360 Wireless Controller Rear Case Replacement: step 0, image 2 of 2

  • Grasp the controller by the battery compartment and the headphone jack.

  • Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board.

  • The battery contact springs are held in place by slots in the battery housing in the rear case. Be sure to realign them properly during reassembly.

Saisissez la manette du côté du compartiment de la batterie et de la prise jack.

Éloignez le compartiment de la batterie de la prise jack, pour séparer le boîtier arrière du boîtier avant et de la carte mère.

Les contacts à ressort de la batterie sont retenus par des fentes dans le compartiment de la batterie. Veillez à bien les aligner lors du remontage.

Your contributions are licensed under the open source Creative Commons license.