Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.
Translating step 10
Step 10
-
To reconnect the cable, first use the tip of a spudger to remove the piece of foam tape over the camera cable ZIF socket.
-
Use the tip of a spudger to flip up the ZIF cable retainer on the camera cable socket.
-
Insert the camera cable into its socket on the camera board and use the tip of a spudger to snap down the ZIF cable retainer, locking the cable in place.
Your contributions are licensed under the open source Creative Commons license.